Brushcutter for mini ex JD 60D or Cat 305.5?
Has anyone built a mini ex quick tach to skid steer adapter & mounted a skid steer 60" cutter on the arm? The weight out there would be 600-800 lbs for a standard duty cutter I'm thinking about...
View ArticleHitachi Zaxis 50 U Slow Hydraulics
I have just purchased a Zaxis 50U (roughly 2005) at a very reasonable price however it has slow hydraulics. When operating the machine the hydraulics take ages to build up pressure to work and when...
View ArticleMini Excavators
I am looking for Hitachi Mini Excavator ZX 33 U3 in Sale ? Looking for them in auctions also.
View ArticleKX 91-2 swivel
I was hoping someone out there could help me with my mini Kubota. The swivel has minimal resistance, engine running or not. With the bucket off the ground, you can swing the table around in a circle by...
View Article2011 JCB 8014 Immobiliser Problems
Hi Guys I have a JCB 8014 2011 and it is not Reconising its Key on the Immobiliser. I have tried to reprogramme the key with the Red master Key. but it still will not start. Has anyone else had this...
View Article'05 Cat 305 CR electrical problem, no start, ignition dead
Started the excavator this morning to move it 50 feet out of the way, started fine, shut it off, about a hour later came back and tried to move it and when turning the key on it would beep, fuel needle...
View ArticleMice
What do you guys do to keep mice out of your machines? I've tried bounce dryer sheets and moth balls. No avail. Every time I start the machine up, atleast 3 run out of it. Today I chased one with a...
View ArticleKubota kh 41 rotary joint
Hi i have a Kubota kh 41 with a leak on the rotary joint when I use the blade /dozer and travelling backwards can anyone tell me how to remove the rotary joint from the machine and if I can buy a seal...
View ArticleHitachi ex60 parts
Working on a customer ex60 and s / n tag is missing. It has a nissan engine and from what I can find online it is a bd30. Local hitachi dealer has no engine info and nissan forklift can't seam to help...
View Articlecase cx36 slow/weak hydarulics
Hi guys, need some help with my 2003 case cx36. I bought the machine used from a company I used to work for who was meticulous for maintenance and I know the history of the machine from day 1. Machine...
View ArticleKubota KX61-2 Track Problems HELP!!!!!!
I am currently working on a Kubota KX61-2, neither track will move. I have done some pressure checks, and have pressure on my lines going into motor. There is 1 line I have no pressure on. Neither...
View ArticleYuchai excavators
Hi guys just wondering if anyone has a Yuchai excavator or knows someone that has and what you or they think of it. Please
View ArticleIs there a suspension seat available for a Case CX50B
I spent the day removing asphalt and concrete from streets for patches. The seat in our CX50B has slightly more cushion than a folding chair, My lower back is really feeling it. Is there a Case seat,...
View ArticleI need a bigger machine
Hey guys, I want to upgrade from My KX-71 Kubota (cabless) I have a 1 ton dump to haul it. What would you sugest?
View Articlecat 308c cr
we have a cat 308 going on 4500 hrs and the final drives are shot. before fixing it looking at a new machine. the problem with the new 308e is the swing boom sticking to far out from the cab not being...
View ArticleTilt bucket problem on my Kubota Kx101-3@, 2007
Hi I have a problem with the tilt bucket on my machine. It starts to 'walk' slowly to one side when i activate the aux hydraulic. And the auto idle don't cut the RPMs on the engine when the aux...
View ArticleTakeuchi t b 135 hyd. fill cap placement
I don't know where to fill my hyd. fluid resevor in my takeuchi tb 135. Seems like it was one of those big bolt looking caps on the right side at the top. Is that right? Do I need to let off the...
View ArticleBasic Mini Excavator Questions
I am in the market for a mini excavator. I honestly know very little about them and would appreciate some help. First of all, I will say that I do not do construction for a living and never will. This...
View ArticleClik here to view.
Kobelco SK 024/Thumb ?
New guy here. I got a line on a Kobelco SK024 machine (early 90's I think). I am looking for an excavator to use on our land up on Lake Vermillion for clearing and foundation work for a cabin. This is...
View ArticleBobcat E35 Long Arm (2014 model)
Hi there guys I will keep it brief. In the market for a new digger,I have a 2012 ZX35 Hitachi (3.5ton),860hrs machine,looking for something with a bit more power without going up a class. I have had a...
View Article