302.5 load check valve location
I may need to replace my load check valve in the main vale for the boom cirquit any help in location of this valve would be helpful {THANKS**
View Articleex 120
The swing on the excavator started sticking started idling down and then sticks wiggle the stick around it clunks then will move fine as long as you don't let it sit it works fine any ideas
View Articleimplements trencher and fail mower for mini excavator anyone have any...
I am interested in picking up a newer 8000lb ish excavator, and looking for input from anyone who has experience running a trencher or a flail mower on a machine of this size. Curious how they work...
View ArticleCAT 305 series... Your thoughts.
Hey Everyone! Just wanted some feedback from those of you who have a 305. As my business progresses over the next few years I want to eventually pick up a 305C CR or D CR. I plan on using it for...
View ArticleCat 302.5 Arm will only swing one direction
Hey guys, Did a search and couldn't find to much on this so I just wanted to ask if anyone has had this problem with their mini. The machine is a Cat 302.5. everything works on it fine, but the arm...
View ArticleMitsubishi MM57 SR.
Hello folks . I am very new new at this , but i am looking at buying a 2000 Mitsubishi MM57 SR. Mini excavator with 3300 hours. Has anyone heard of this brand name and if so , would one know where...
View Articleboom pins and bushings
Any one know where I can find good quality pins and bushings better price than cat for a 302.5 mini excavator THANKS for any help
View ArticleKobelco sk60 monitor problems
Hi all new to this forum. Glad to find help so close at hand. The monitor on my Kobelco works part time and lately not much at all. When not working i also have no voltage output from the alternator...
View Articlecat 305ccr track replacement advise
I have a cat 305ccr with 800 hrs on it. the 305 is used in a rocky environment and on asphalt. The tracks are showing the steel cables, broken cables and a few of the crossover metal drive bars are out...
View ArticleNewbie....question about a Cat 301.5cr
Hi everyone....thank you for providing such a useful forum! I'll apologise firstly for the long post....I'm on a steep learning curve and am trying to gather a fair bit of info. Recently I purchased a...
View ArticleBobcat 442
I came across a Bobcat 442 machine and I am going to look at this weekend. Anyone got any positives or negatives about this machine? ~2500hrs on the machine. Anything I need to really take a look at...
View ArticleOne or Two Spare Tracks?
I just bought a Takeuchi TB-135 and was thinking it would be wise to keep a spare track on hand. I'm not very experienced with this sort of equipment and I suspect my military APC experience would be...
View ArticleMini Excavators
Hi Guys I have never owned a mini excavator before and was hoping for some advice on what brand of machine to buy Im a paver and will be using it mostly for removing grass and soil also thinking of...
View ArticleKubota gland wrench
I havea 2007 kx121-2. We ha downed the machine 6yrs. I noticed a cylinder starting to drip, time to repackage a cylinder. I have never seen a gland wrench that will fit these cylinders. Short of...
View ArticleDead controls on MM55sr
Hello everybody, I have an old MM55sr and parked it a couple of months ago and when I went to do some work the controls are dead. I dropped the console and no action. I had stretched out the machine a...
View ArticlePel job EB12 Service Booklet / Works manual needed, Can any one help Please
Hi i have just purchased a pel job EB12, old and well used, i am just starting my house extension so i need the old girl to be fighting fit and desperate to get hold of a works manual / service booklet...
View Articlecat 303.5 engine, hydrolics
2 part question. 1, just bought it, engine is 3 cyl perkins. It vibrates, mostly when just above idle, but powers up and seems ok. I thought maybe injector? Anyone know how to isolate the ofender if...
View Articletb125 questions - what's normal?
recently bought an 04 takeuchi tb125 with 3300 hrs on it. I'm not terribly familiar with mini x's in general, but I was hoping someone could weigh in on what's normal operation for one of these. a...
View Articletheft deterent?
I've been noticing a few people on craigslist posting about stolen equipment. It got me thinking, because I was parking my machine on busier street. Now, I've moved it to the back of the site, out of...
View ArticleI need mechanic in North New Jersey to repair my EX60URG
My EX60URG has been down for a year. I have had 3 mechanics look at it with no results. It runs fine but has a hydraulic problem. I an in Lodi, NJ Please call me Mike 973-747-6234
View Article